Replaced bolts in speaker with proper length (i.e., shorter) ones, and reversed them so the extra length is at the top, hidden by the bracket.
Removed the speaker horn for repainting using the recently-purchased “crinkle” finish paint.
Tried to find the cause of the noise in the passenger side floor vent. Removed the panel around the vent opening and could not see anything obvious. I suspect there is something caught higher up in the duct, or there is a gasket in the vent that is worn and vibrating in the breeze.
Dropped off the whip antenna, now that it’s been cut down to the proper size.
Test fit and adjusted the Visibar. Looks good!
Assembled the speaker and installed it on the bar.
Cut the sides for the radio console.
Gave the speaker bell what I hope will be its last coat. It looks pretty good, but not “perfect.”
Cleaned one set (the “worst-condition” set) of dog dish hubcaps. The “better” set has paint around the edges that will be more work to get off.
Cut antenna to proper length (5’3″).
Ordered wing nut for spare tire.